Perle Systems S-100MM-XXXXX User Manual download pdf (Page 3)

Fast Fiber to Fiber Media Converter – Installation Guide 3

Installation

The default switch settings (all switches in the UP position) will

work for most installations.

These are the steps required to configure the Perle Fast Fiber to

Fiber media converter:

1. Set the DIP switch settings (optional).

2. Install and connect the fiber cable to port MM1.

3. Install and connect the fiber cable to port MM2/SM2.

4. Power up the media converter.

DIP Switches

The DIP switches are accessible through the opening in the side

of the enclosure

Note: All switch changes take effect immediately and will result in

a link reset on both fiber ports.

1 2 3 4 5 6 7 8 ... 12 13

Comments to this Manuals

No comments