Perle Systems P840 User Manual download pdf (Page 51)

Filtering

DEC

DEC uses protocol types 6000 to 600F, and although some are undefined, a simple filter mask can be created to filter

all DEC traffic.

Filter all DEC

The mask to filter all DEC traffic would be: 12-600X

The X is a variable representing the last four bits (a nibble) of the type. This will effectively filter all Ethernet frames

that contain a protocol type of 6000 through to 600F. All 16 possible combinations are covered.

Bandwidth Conservation

Reducing traffic on each LAN segment is one benefit of the bridging functions of a P840 router. There are several simple

methods that may be used to provide a further reduction of inter-LAN traffic. The examples that follow present a few very

simple methods to reduce inter-LAN traffic, without necessarily reducing resource capability.

Ethernet Broadcasting

On an Ethernet LAN, any station may broadcast information to all other stations by setting the Ethernet Destination

address to FF-FF-FF-FF-FF-FF. By configuring the destination address to this setting, it is telling all other stations

that this is a broadcast message.

In many situations, stations will abuse this broadcasting capability and send useless information to other stations in

the network. To prevent this information from being seen across the link on the other LAN segment, a filter mask

can be used.

To prevent broadcast information from being passed across the link, use the following filter mask:

0-FFFFFFFFFFFF

This prevents any frame with a destination address field set to the broadcast address from being passed to the second

LAN segment across the link.

Ethernet Multicasting

An Ethernet multicast is a frame of data where the destination address has the high-order bit set to a “one” condition.

It is similar to a broadcast, but is to be received by a “group” of stations that meet the remainder of the address. In

this manner, a broadcast is focused to a specific group of stations.

To filter multicast frames, the following mask could be used : 0-’1XXX’X

In this example the high-order bit by multi-cast definition must be set to a “one”. The single quotes around the first

four positions instructs that the four positions constitute 4 bits, or a nibble, of the entire expression; each position

representing a single bit. The “1” indicates that that bit position must be equal to a “1” before the expression is true.

The X’s that are included within the single quotes represent a single don’t care for those bit positions in the first

nibble. The X that is located outside of the single quotes represents a don’t care condition for the later nibble.

NOTE: With this mask, both broadcast frames and multicast frames will be filtered.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

No comments

Perle Systems P840 User Manual Page 51