Perle Systems 5500208-41 User Manual download pdf (Page 23)

IPv6 Commands

Set IPv6

Description Configures the basic IPv6 settings.

User Level Admin

Syntax

Options dhcpv6-settings

ivp6-address

network-prefix

enable-ipv6-addressing

obtain-using auto-ipv6|dhcpv6

z auto-ipv6—When enabled, the IOLAN will send out a Router Solicitation

message. If a Router Advertisement message is received, the IOLAN will configure

the IPv6 address(es) and configuration parameters based on the information

contained in the advertisement. If no Router Advertisement message is received,

the IOLAN will attempt to connect to a DHCPv6 server to obtain IPv6 addresses

and other configuration parameters. This is the default.

z dhcpv6—When enabled, requests IPv6 address(es) and configuration information

from the DHCPv6 server.

Show IPv6

Description Shows the IPv6 settings.

User Level Admin

Syntax

set ipv6 [dhcpv6-settings ipv6-address on|off]

[dhcp-settings network-prefix on|off]

Set ipv6 enable-ipv6-addressing on|off

[obtain-using auto-ipv6|dhcpv6]

Determines the types of information that the IOLAN will accept from the DHCPv6

server, IPv6 address(es) and/or network prefix(es).

When enabled, the IOLAN will accept IPv6 address(es) from the DHCPv6 server. This

off by default.

When enabled, the IOLAN will accept the network prefix from the DHCPv6 server.

This is

off by default.

When enabled, you can configure the IOLAN to obtain the IPv6 address(es) using IPv6

Autoconfiguration or a DHCPv6 server.

Default: Enabled

show ipv6

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 92 93

No comments

Perle Systems 5500208-41 User Manual Page 23