Perle Systems 5500208-41 User Manual download pdf (Page 71)

TFTP File Transfer Commands

Netload

Description Transfers a file from a remote host to the IOLAN using the TFTP protocol.

User Level Admin

Syntax

Options text-config

Specify this option if you are uploading a text-based configuration file to the IOLAN

from a TFTP server.

factory-default-config

firmware

Specifies that you are going to download a new firmware file to the IOLAN.

configuration

Specifies that you are going to download a new configuration file to the IOLAN.

customlang

Specifies that you are going to download a custom language file to the IOLAN.

term1|term2|term3

You can create and download up to three custom terminal definitions to the IOLAN.

customapp-file

The IP address or host name where the file you are downloading to the IOLAN resides.

If you are using a host name, it must be resolved in either the IOLAN’s

Host Table or a

DNS server.

The complete path and file name (cannot use a drive letter) of the file you are

downloading to the IOLAN.

netload text-config|factory-default-configfirmware|configuration|

customlang|term1|term2|term3|customapp-file

Specifies the configuration file that you are going to load from a TFTP server to the

IOLAN that will act as the factory default configuration. See the User Guide for

directions on how to revert back to the original factory default configuration, if

required.

You can download multiple SDK program executables and ancillary files using this

command by running the command multiple times to download multiple files. Use the

shell CLI command as described in the SDK Programmer’s Guide to manage the files

that you download.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 92 93

No comments

Perle Systems 5500208-41 User Manual Page 71