Perle Systems 5500208-41 User Manual download pdf (Page 49)

Line Service Commands

Set Telnet-Client

Description Configures the Telnet parameters for the specified line. When the IOLAN initiates a

Telnet connection to a host, it is acting as a Telnet client.

User Level Normal, Admin

Syntax

Options termtype

line-mode

map-cr-crlf

local-echo

echo

eof

erase

intr

quit

escape

set telnet-client line .|<number>|* [termtype <terminal_name>]

[line-mode on|off] [map-cr-crlf on|off] [local-echo on|off]

[echo <00-7f>] [eof <00-7f>] [erase <00-7f>] [intr <00-7f>]

[quit <00-7f>] [escape <00-7f]

Type of terminal attached to this line; for example, ANSI or WYSE60.

When On, keyboard input is not sent to the remote host until Enter is pressed,

otherwise input is sent every time a key is pressed. Default is

Off.

Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is

Off.

Toggles between local echo of entered characters and suppressing local echo. Local

echo is used for normal processing, while suppressing the echo is convenient for

entering text that should not be displayed on the screen, such as passwords. This

parameter can only be used when

Line Mode is On. Default is Off.

Defines the echo character. When Line Mode is On, typing the echo character echoes

the text locally and sends only completed lines to the host. This value is in hexadecimal

with a default value of

5 (ASCII value ^E).

Defines the end-of-file character. When Line Mode is On, entering the eof character as

the first character on a line sends the character to the remote host. This value is in

hexadecimal with a default value of

4 (ASCII value ^D).

Defines the erase character. When Line Mode is Off, typing the erase character erases

one character. This value is in hexadecimal with a default value of

8 (ASCII value ^H).

Defines the interrupt character. Typing the interrupt character interrupts the current

process. This value is in hexadecimal with a default value of

3 (ASCII value ^C).

Defines the quit character. Typing the quit character closes and exits the current telnet

session. This value is in hexadecimal with a default value of

1c (ASCII value FS).

Defines the escape character. Returns you to the command line mode. This value is in

hexadecimal with a default value of

1d (ASCII value GS).

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 92 93

Comments to this Manuals

No comments

Perle Systems 5500208-41 User Manual Page 49

Comments to this Manuals

Related products and manuals for Networking Perle Systems 5500208-41