Perle Systems 5500208-41 User Manual download pdf (Page 52)

Line Service Commands

52 IOLAN DS1/TS2 CLI Reference Guide, Version 4.1

Set Vmodem-Phone

signals dtr

You can specify how the DTR signal pin acts during your modem application

connection, as itself (DTR), as DCD, or as RI.

signals rts

You can specify how the RTS signal pin acts during your modem application

connection, as itself (RTS), as DCD, or as RI.

style

One of the following:

z Verbose—Return codes (strings) are sent to the connected device.

z Numeric—The following characters can be sent to the connected device:

0 OK

1 CONNECTED

2 RING

3 NO CARRIER

4 ERROR

6 ITERFACE DOWN

7 CONNECTION REFUSED

8 NO LISTNER

success-string

String that is sent to the serial device when a connection succeeds. If no string is

entered, then the string

CONNECT will be sent with the connecting speed, for example

CONNECT 9600.

suppress

If set to No, connection success/failure indication strings are sent to the connected

device, otherwise these indications are suppressed.

Description This command associates a phone number with an IP address and TCP port. This

enables the existing modem application to issue a dial command with a phone number.

The phone number will be searched in this table and if an exact match is found, the

associated IP address and TCP port will be used to establish the connection. This is a

universal command, meaning that all VModem lines will have access to the entries

defined here. 1-port models support up to 4 entries, all other desktop models support up

to 8 entries, and rack-mount models support up to 48 entries.

User Level Admin

Syntax

set vmodem-phone entry <number> phone-number <string>

<IP_address> <TCP_port>

set vmodem-phone entry <number> delete

Options entry

Specify the entry number in the vmodem phone number table.

phone-number

Specify the phone number that your application uses to connect to remote location.

Enter the number exactly as it is issued by your application.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 92 93

Comments to this Manuals

No comments

Perle Systems 5500208-41 User Manual Page 52

Comments to this Manuals

Related products and manuals for Networking Perle Systems 5500208-41