Perle Systems 5500208-41 User Manual download pdf (Page 58)

Packet Forwarding Commands

58 IOLAN DS1/TS2 CLI Reference Guide, Version 4.1

custom-on-specific-events

This section allows you to set a variety of packet definition options. The first criteria

that is met causes the packet to be transmitted. For example, if you set a

Force

Transmit Timer

of 1000 ms and a Packet Size of 100 bytes, whichever criteria is met

first is what will cause the packet to be transmitted.

custom-on-frame-definition

This section allows you to control the frame that is transmitted by defining the start and

end of frame character(s). If the internal buffer (1024 bytes) is full before the EOF

character(s) are received, the packet will be transmitted and the EOF character(s) search

will continue. The default frame definition is SOF=00 and EOF=00.

enable-end-trigger1

Enable or disable the end trigger1 hex character.

enable-end-trigger2

Enable or disable the end trigger2 hex character.

enable-end-eof1

Enable or disable the eof1 (end of frame) hex character.

enable-end-eof2

Enable or disable the eof2 (end of frame) hex character.

enable-end-sof1

Enable or disable the sof1 (start of frame) hex character.

enable-end-sof2

Enable or disable the sof2 (start of frame) hex character.

end-trigger1

When enabled, specifies the character that when received will define when the packet is

ready for transmission. The transmission of the packet is based on the Trigger

Forwarding Rule. Valid values are in hex 0-FF. The default is 0.

end-trigger2

When enabled, creates a sequence of characters that must be received to specify when

the packet is ready for transmission (if the End Trigger1 character is not immediately

followed by the End Trigger2 character, the IOLAN waits for another End Trigger1

character to start the End Trigger1/End Trigger2 character sequence). The transmission

of the packet is based on the Trigger Forwarding Rule. Valid values are in hex 0-FF.

The default is 0.

eof1

Specifies the End of Frame character, which defines when the frame is ready to be

transmitted. The transmission of the frame is based on the Trigger Forwarding Rule.

Valid values are in hex 0-FF. The default is 0.

eof2

When enabled, creates a sequence of characters that must be received to define the end

of the frame (if the EOF1 character is not immediately followed by the EOF2 character,

the IOLAN waits for another EOF1 character to start the EOF1/EOF2 character

sequence), which defines when the frame is ready to be transmitted. The transmission

of the frame is based on the Trigger Forwarding Rule. Valid values are in hex 0-FF. The

default is 0.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 92 93

Comments to this Manuals

No comments

Perle Systems 5500208-41 User Manual Page 58

Comments to this Manuals

Related products and manuals for Networking Perle Systems 5500208-41