Perle Systems 5500208-41 User Manual download pdf (Page 79)

Set IOChannel

Set IOChannel Mode

Description Sets general I/O channel settings for the specified channel, these settings are available

to all channels and I/O serial pins.

User Level Admin

Syntax

Options i/o_channel

Specify the channel number, for example, d2 or a4. Temperature models use Analog

input, so the channel numbers are a1-a4.

mode

description

Set IOChannel Digital I/O

Description Sets up the Digital I/O channel to act as either an output or input channel.

User Level Admin

Syntax

Options digital_channel

Specify the Digital channel number, for example, d2.

source-type

Set IOChannel Digital Input

set iochannel <i/o_channel> [mode enabled|disabled]

[description <string>]

Enables the channel, allowing the settings to become active.

Provide a description of the channel, making it easier to identify. The channel

description can be up to 20 characters.

set iochannel <digital_channel> source-type input|output

Specify whether the channel will drive the line (output) or will be reading the status of

the line (input). The default is

Input. The internal jumpers must match the software

configuration, so if you change this setting to

Output, you will have to also change the

internal hardware jumpers.

Description Sets the Digital input settings for the channel.

User Level Admin

Syntax

set iochannel <digital_channel>

[alarm [trigger disabled|inactive-input|active-input]

[clear auto|manual] [syslog on|off] [snmp on|off]]

[description <string>] [invert-signal on|off]

[latch disabled|inactive-to-active|active-to-inactive]

Options digital_channel

Specify the Digital channel number, for example, d2.

alarm

Configures alarm settings when the Digital input trigger is activated.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 92 93

Comments to this Manuals

No comments

Perle Systems 5500208-41 User Manual Page 79

Comments to this Manuals

Related products and manuals for Networking Perle Systems 5500208-41