Perle Systems 5500208-41 User Manual download pdf (Page 33)

Configuring Users

hotkey-prefix

The prefix that a user types to control the current session. The default value is hex 01,

which corresponds to Ctrl-a (^a) (hex value 02 would be Ctrl-b (^b), etc.):

z ^a number—To switch from one session to another, press ^a and then the required

session number. For example,

^a 2 would switch you to session 2. Pressing ^a 0

will return you to the IOLAN Menu.

z ^a n—Display the next session. The current session will remain active. The lowest

numbered active session will be displayed.

z ^a p—Display the previous session. The current session will remain active. The

highest numbered active session will be displayed.

z ^a m—To exit a session and return to the IOLAN. You will be returned to where

you left off. The session will be left running.

z ^a l—(Lowercase L) Locks the line until the user unlocks it. The user is prompted

for a password (any password, excluding spaces) and locks the line. Next, the user

must retype the password to unlock the line.

z ^r—When you switch from a session back to the Menu, the screen may not be

redrawn correctly. If this happens, use this command to redraw it properly. This is

always

Ctrl R, regardless of the Hotkey Prefix.

The

User Hotkey Prefix value overrides the Line Hotkey Prefix value. You can use the

Hotkey Prefix keys to lock a line only when the line Lock parameter is On.

idle-timer

The amount of time, in seconds, that the Idle Timer will run. Use this timer to close a

connection because of inactivity. When the

Idle Timer expires, because there has been

no exchange of data within the specified time, the IOLAN will close the connection.

The default value is

0 (zero), meaning that the Idle Timer will not expire (the

connection is open permanently). The maximum value is 4294967

seconds. The User

Idle Timer

will override the Line Idle Timer, with the exception of reverse Telnet

sessions.

language

You can specify whether a user will use English or Customlang as the language that

appears in the Menu or CLI. The IOLAN supports one custom language that must be

downloaded to the IOLAN; otherwise,

Customlang defaults to English.

level

The access that a user is allowed:

z Admin—The admin level user has total access to the IOLAN. You can create more

than one admin user account but we recommend that you only have one. They can

monitor and configure the IOLAN.

z Normal—The Normal level user has limited access to the IOLAN. Limited CLI

commands and Menu access are available with the ability to configure the user’s

own configuration settings.

z Restricted—The Restricted level user can only access predefined sessions or

access the Easy Port Access menu.

z Menu—The menu level user will only be able to access predefined session or

access the Easy Port Access menu. The Easy Port Access allows the user to

connect to the accessible line without disconnecting their initial connection to the

IOLAN. Does not have any access to CLI commands.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 92 93

Comments to this Manuals

No comments

Perle Systems 5500208-41 User Manual Page 33

Comments to this Manuals

Related products and manuals for Networking Perle Systems 5500208-41