Perle Systems 5500208-41 User Manual download pdf (Page 89)

Set IOChannel

connection-method

The connection-method is one of the following:

z Client-Initiated—When specified, the channel/serial signal pin will wait for

connections to be initiated by another I/O channel or a TCP/IP application.

z Server-Initiated—When specified, the channel/serial signal pin initiates

communication to another I/O channel or a TCP/IP application.

z Local-Connection—When specified, the input or output, depending on how the

channel or serial signal pin is configured, will be associated with another local

IOLAN I/O channel or serial signal pin.

When the channel is configured as digital input or when configuring an input serial

signal pin, the

Output Channels parameter displays all the local digital output

signals or relays that it is associated with.

When the channel is configured as digital output, you must select a local digital

input channel or input serial signal pin on the IOLAN.

Note that the

Failsafe Action is not compatible with the local-connection option.

Default: Client-Initiated

client-initiated tcp-port

The TCP port that the channel/serial signal pin will use to listen for incoming

connections.

Default: 2000 for channel 1, then increments by one for each channel

client-initiated multihost

When this option is enabled, multiple I/O channels and/or TCP/IP applications can

connect to this channel/serial signal pin. The default is off.

server-initiated tcp-port

The TCP Port that the channel/serial signal pin will use to communicate to another

IOLAN or a TCP/IP application.

Default: 2000 for channel 1, then increments by one for each channel

server-initiated multihost all|backup <config_backup_host> <tcp_port>|none

Used for connections going from the Digital input channel or input serial signal pins,

allows the input channel/serial signal pin to communicate to either all the hosts in the

multihost list or a primary/backup host schema (see Configuring Multiple Hosts in the

IOLAN User’s Guide for a more detailed explanation).

local-connection <input_channel>

Specify the Digital input channel or input serial signal pin that will control the

Digital/Relay output channel or output serial signal pin.

1 2 ... 84 85 86 87 88 89 90 91 92 93

No comments

Perle Systems 5500208-41 User Manual Page 89